Frame & Fork

Filter
    269 products
    Pacenti 1-1/8" Artisan II fork crown - 50mm inside width - flat with long inner tangs
    1" Artisan II fork crown - 50mm inside width - Designed by Kirk Pacenti
    $ 38.75
    1" Fork crown - 36mm inside width - semi-slope
    $ 21.25
    1" Fork crown - 42mm inside width - flat with long inner tangs
    $ 21.25
    1" Fork crown - 43mm inside width - flat with long outer tangs - 7° angle offset
    $ 22.95
    1" Fork crown - 50mm inside width - biplane design
    $ 22.95
    1" Fork crown - 50mm inside width - flat with long inner tangs
    $ 21.25
    1" Fork crown - 50mm inside width - full slope design
    $ 21.25
    1" Fork crown - 60mm inside width - full slope design
    $ 22.95
    1" Fork crown - 60mm inside width - full slope design - 7° angle offset
    $ 20.95
    1" Fork crown for round fork blades - 43mm inside width - flat with long inner tangs
    $ 20.95
    1" MTB fork crown - 74mm inside width - Designed by Kirk Pacenti
    $ 42.95
    Pacenti Paris-Brest fork crown. For a 1" steerer, with 56mm inside width
    1" Paris-Brest fork crown - 56mm inside width - Designed by Kirk Pacenti
    $ 40.95
    Pacenti 1-1/8" Artisan II fork crown - 50mm inside width - flat with long inner tangs
    1-1/8" Artisan II fork crown - 50mm inside width - Designed by Kirk Pacenti
    $ 38.75
    1-1/8" Fork crown - 36mm inside width - semi-slope
    $ 21.25
    1-1/8" Fork crown - 42mm inside width - flat with long inner tangs
    $ 21.25
    1-1/8" Fork crown - 50mm inside width - biplane design
    $ 22.95
    1-1/8" Fork crown - 50mm inside width - flat with long inner tangs
    $ 21.25
    1-1/8" Fork crown - 50mm inside width - full slope design
    $ 21.25
    1-1/8" Fork crown - 52mm inside width - flat with long inner tangs - 5.7° angle offset
    $ 20.95
    1-1/8" Fork crown - 60mm inside width - full slope design
    $ 22.95
    1-1/8" Fork crown - 60mm inside width - full slope design 7° angle offset
    $ 20.95
    Pacenti 1-1/8" MTB fork crown - 74mm inside width
    1-1/8" MTB fork crown - 74mm inside width - Designed by Kirk Pacenti
    $ 42.95
    Pacenti 1-1/8" Paris-Brest fork crown - 56mm inside width
    1-1/8" Paris-Brest fork crown - 56mm inside width - Designed by Kirk Pacenti
    $ 40.95
    Artisan lug set, oversize 1" - Designed by Kirk Pacenti
    $ 55.95
    Bottom head lug oversized 1" frame, 31.8mm headtube and 31.8 downtube, 60 degrees, lugged steel custom bicycle frame
    Bottom lug for oversize 1" frame - 31.8mm head tube and 31.8 down tube - 60°
    $ 12.25
    Bottom lug for oversized 1" frame - blank for carving - 31.8mm headtube and 31.8 downtube - 60°
    Bottom lug for oversize 1" frame - blank for carving - 31.8mm head tube and 31.8 down tube - 60°
    $ 16.95
    Bottom head lug for oversized 1-1/8" frame - 36mm headtube and 31.8 downtube - 60 degrees, lugged steel custom bicycle frame
    Bottom lug for oversize 1-1/8" frame - 36mm head tube and 31.8 down tube - 60°
    $ 12.25
    Bottom head lug for standard 1" frame - 31.8mm headtube and 28.6 downtube, 60 degrees, lugged steel custom bicycle frame
    Bottom lug for standard 1" frame - 4 points - 31.8mm head tube and 28.6 down tube - 59.5°
    $ 12.25